112 Antique Silver 2'x2' PVC Decorative Ceiling Tile Panels Glue-Up (Lot of 12)

Description

Quick Facts
Approximate
Size:
24.25 in. x 24.25 in.
Coverage:
48 sq. ft. (12 tiles total)
Depth of Design:
.47 in.
Material:
PVC (Vinyl)
Moisture Resistant?
Yes
Installation Methods:
Glue Up Only (this style is NOT for grid installation)
Fire Rating:
Class "A" -
essential for commercial or residential installations that require a fire rating for ceiling tiles to meet local fire codes.
How many tiles do you need?
Measure the area you want to cover and divide that by 4. We recommend that you add 10% for waste/replacement tiles.
For our international
(Non-U.S.)
customers:
Please note that our shipping prices are for shipping charges only. There may be additional charges such as customs or duties that the customer is responsible for.
Do you need the tile accessories below? Visit our Ebay store!
Border Tiles
The border tile is an attractive, slightly textured tile that is perfectly suited for use as a border tile.
The pattern-free design allows it to lay flat, even when cut to size, which eliminates the worry of gaps.
Grid & Seam Covers
If you are looking to match your suspended grid system to the tiles, consider ordering our grid/seam covers for a perfect match.
Our grid/seam covers could also be used in glue-up applications to achieve a seamless look!
Glue Up (Direct Mount) Ceiling Tile Installation Instructions:
Follow these simple steps to glue tiles:
1. Wipe off the ceiling/surface to make it smooth and even. Remove loose plaster, paint, wall paper etc.
2. Before you begin, lay a few tiles out on the floor to check the size and overlap. Note that our tiles are not exactly 24" x 24". They are either
23.75" x 23.75" or 24.25" x 24.25" depending on the style that you purchase. This is important to know when planning the layout.
3. Use grid paper to plan your layout. Indicate any obstacles such as lights and vents on the ceiling. Plan an even border on all sides for a symmetrical look.
4. It is recommended to start installing from the center of the ceiling.
5. Draw straight lines on the ceiling to outline the first tile at a 90-degree angle.
6. Apply a thin layer of a good quality adhesive, we recommend using either Dap Weldwood Contact Cement or PL Premium Advanced by Loctite, on the edges and crossed section of the tile. We also suggest applying the adhesive on the ceiling for better bonding.
7. Place the first tile into the required position and press firmly but gently.
8. With overlap - For the remaining tiles, overlap the edges of each previous tile by your predetermined amount of overlap. The tiles can be cut with scissors to achieve a desired size.
9. Without overlap (using Artile grid/seam strips) - For the remaining tiles, place each tile next to the previous tile, with edges touching. Use Artile grid/seam strips to confirm you are placing the tiles with the correct spacing.